A wire based lifeline system providing fall arrest / restraint protection when working at height.
KEELINE Fall Protection System
The KEELINE lifeline system provides fall arrest / restraint protection where guardrails are not suitable or where planning considerations require a virtually invisible fall protection solution. A wire based horizontal lifeline system offers a flexible, cost-effective solution for protecting workers at height.
KEELINE provides complete and continual “handsfree” protection for up to three users when used as a fall arrest system.
The KEELINE system is fully compliant with the requirements of EN 795:2012, CEN TS 16415:2013, ANSI Z359 and CSA Z259, and has undergone extensive testing in different roof types, with full third party approval. Testing in roof structure was witnessed by Decra.
KEELINE Lifeline System
The KEELINE horizontal lifeline is designed to provide safe access to any area of a roof by allowing workers to be permanently attached to the line at all times and be able to freely move around the roof surface. The KEELINE system utilises 8mm grade 316 stainless steel wire and allows spans of up to 12m between posts.
The system is designed so that the traveller which connects the user to the systems simply glides over brackets, overcoming the need to detach from the lifeline.
KEELINE also incorporates PAS (Progressive Absorbing System). If the user falls, the shock absorbers, intermediate brackets and support posts will deploy and deform so that the loadings applied to the building’s structure is below 10Kn.
Solution for All Types of Roofs
The KEELINE system has been tested and can be installed on a variety of roof types e.g. bitumen membrane roofs, standing seam and metal profile roofs using either "top fix" anchors or a "through fix" anchorr (POSTANKA) where fixing to the main building structure is preferred.
The KEELINE horizontal lifeline can be installed to any steel cladding panel, beam/column structure, solid parapet walls and flat roofs via a support post. When a lifeline system cannot be fixed through the roof’s structure, a free standing fall arrest / restraint system can be provided using our KEE ANCHOR roof anchors. A series of deadweight anchors can be linked at approximately 10m centres via the KEELINE horizontal restraint line.
KEELINE is available for mounting directly to concrete, steel, brick and stonework in either horizontal or overhead applications.
Features of the KEELINE Lifeline System
Personal fall protection system designed for roof installation and horizontal or overhead applications
Tested on multiple roof types
Maximum span between posts 12m
Traveller can pass the whole length of the system without having to be detached at any point
Open style, low posts suit metal profile and standing seam roofs
Specific membrane roof base plate and posts allow simple wreathing installation
Galvanised mild steel or stainless steel parts
Base plates allow multiple fixing options
Conforms to EN 795 2012
Benefits of the KEELINE Lifeline System
Proven fall protection system meeting all current legislative requirements
Safety assurance that the lifeline system is fully functional on all approved surfaces
Minimises the number of posts and roof fixings required
The user is always connected to the system
Posts designed to deploy and deform in event of a fall, minimising the load being applied to the building to below 10Kn
Kee Safety LLC, our Middle East division, designed, supplied and installed KEELINE Horizontal Lifeline System at the Dubai Flower Centre at Dubai Airports.
A facility management team needed to accesses the roof top to carry out regular maintenance of the gutter on the standing seam roof. No safety systems were in place keeping the workers at high risk of falling. A site survey was carried out by Kee Safety Middle East team and KEELINE fall restraint system was proposed and installed.
Kee Safety LLC designed, supplied and installed over 547m KEELINE horizontal lifeline system. The installation was executed in 5 days.
Kee Safety manufactures and supplies a wide range of fall protection systems. We offer site survey and risk assessment ment as well as installation service. Our fall protection systems can be installed by Kee Safety's team or by Kee Safety's approved fall protection partners. Please contact us if you require a risk assessment or installation of fall protection systems.
KEELINE is a wire-based horizontal lifeline system that has been designed to provide continuous fall protection. Fit for use in areas where guardrails are not suitable, the system allows roofers and contractors to safely work on the roof and provides a virtually invisible solution to carry out repairs, maintenance or inspection work. Installed as a permanent lifeline system, it offers uninterrupted access for up to three users across the whole roof, allowing them to freely move around the surface.
The KEELINE system is suitable for all modern roof types, including bitumen membrane roofs, as well as metal profile, standing seam and composite panel roofs.
KEELINE has been tested to EN795 Class C Personal fall protection equipment – Anchor devices.
Typical KEELINE Lifeline System Layout
The drawing below presents typical KEELINE system layout and fixing details, depending on a type of the roof.
KeeLine for Structures
The KEELINE lifeline system for Structures provides the horizontal lifeline components to allow mounting directly to concrete, steel, brick or stonework either in the horizontal or overhead application.
8mm dia horizontal life line system for fixing directly to suitable Steel, Concrete, Brick or Stone structures
Primary components connecting to the cable are fabricated from 316 Grade Stainless Steel
Up to 3 users
Patented in-line shock absorber limits end loads to less than 10 kN
Corner and intermediates bracket options allows system to follow structures shape
Up to 12m spans between supports
Removable Traveller easily passes corners and intermediate brackets for continuous protection and enables users to detach or re-attach at any point of the system
Conforms with EN 795 Class C
The Kee Safety's POSTANKA anchors range offers an alternative fixing method for example when the roof structure is unsuitable for KEELINE Top Fix anchors. Our POSTANKA range of fabricated, hot dip galvanised anchors are designed using a standard calculation program to the requirements of EN795 Class 2.
POSTANKA posts are used where is preferable to mount directly to a building structure, e.g. on traditional sloping roofs or onto concrete roof decks, e.g. on green roofs.
POSTANKA anchors are available in standard sizes but are more typically designed to suit customer’s specific application.
The video below presents our POSTANKA anchor used with the KEELINE lifeline system.
POSTANKA anchors are available in two styles.
Type 3 Postanka
Designed to clamp around either suitable wooden or steel beams and features a solid adjustable height pedestal.
Type 6 Postanka
A solid central pedestal welded to a 15mm thick base plate. Available with multiple fixing options.
As the POSTANKA range can be designed to suit a particular application, anchors can be produced for mounting other products for example KEE WALK or solar panels.
KEELINE Overhead provides personal fall protection, either fall arrest or restraint, for up to three users. Used where it is beneficial to have the life line system mounted directly above the user including vehicle loading, machine maintenance and access, building maintenance and cleaning and overhead crane access.
A KEELINE Overhead features a permanently attached two wheeled traveller which passes smoothly over the intermediate brackets, even when the user is attached to a fully extended inertia reel.
The system can be configured to allow single or multiple spans of up to 30m in between supports and is designed with a higher pre-tension than the standard KEELINE system to reduce line sag and cable deflection. The system’s in-line shock absorber minimises the end loads back to the supporting structure.
A grade 316 stainless steel wire and electro-polished components ensure a low maintenance and durable system.
Features and Benefits of the KEELINE Overhead System
Higher pre-tension than standard KEELINE systems reduces sag and cable deflection
Independently tested by Satra to the requirements of EN795 Type C
Overhead fall protection for up to three users
Durable electro-polished grade 316 stainless steel brackets and traveller