A modular easy to install roof walkway system designed to the requirements of EN 516:2006.
Permanent roof walkway solution
Kee Walk® provides a safe, anti-slip, level walkway for anyone who needs to access a roof in the course of their work. It provides a clear demarcation route which protects the roof surface from unnecessary damage and uniformly distributes the pedestrian load across its surface.
Kee Walk® is designed for modern roof types including trapezoidal profile composite or built up and standing seam metal roofs. It can be used on flat, barrel and sloping roofs, with steps and a traverse option allowing access to be created for virtually any roof configuration from 0 to 35 degrees. The product complies with the test requirements of EN 516:2006.
Clear on-roof demarcation to prevent roof surface being damaged
Designed for modern roof types including trapezoidal, profile, composite or built up and standing seam metal roofs
Flexible, modular roof walkway system adaptable to changing roof angles from 0 to 35 degrees; fully adjustable on site
Standard parts available from stock
Modules supplied as 1.5m and 3m pre-assembled sections
Steps and a traverse option available
Nylon or aluminium treads with enhanced slip resistance ensure Kee Walk® is secure under foot
The Glass reinforced Nylon Treads have excellent UV stability so will not degrade with exposure to intense sunlight
The Nylon treads are fire rated to Class HB of UL94 so don’t present a fire risk
Easy to install and cost effective roof walkway safety solution
Ease of installation
Kee Walk® is is available as standard in Nylon or Aluminium treads, the system is offered in standard modules, which can be supplied ex-stock for rapid installation on vitually any rooftop project. The modules are supplied as 1.5m and 3m pre-assembled sections to suit the requirements of different roofs. These lightweight modules are constructed from glass reinforced nylon or aluminium treads attached to aluminium support beams that are fixed to the roof surface.
Steps and a traverse option, complete with an adjustable hinge, enable Kee Walk® to be added to roof configurations from 0 to 35 degrees. The installer can easily set the angle of the steps, by removing the locating bolt in the hinge, adjusting the angle and replacing the bolt at the desired point on the hinge. No bespoke parts are required.
Kee Walk® longitudinal sections weigh less than 9kg/m and are easily handled by two workers for ease of installation.
EN516:2006 is the European standard for the test requirements of roof access walkways, which include measuring the deflection and residual deformation under specified loads. These criteria have been surpassed in all testing and as this is a harmonised standard allows the system to be CE marked under the European Construction Products Regulation No. 305/2011.