A fully adjustable range of self-closing safety gates for use in rooftop or industrial environments. Safety gates are ideal for protecting any openings, ladder/stair access points, roof hatches, walkways, access to industrial machinery and other restricted areas, where regular access for maintenance and inspection is required. Our gates are spring loaded so will automatically close behind the user.
Spring loaded safety gates are considered the preferred solution to chains, bars or sliding tubes when protecting these areas as they automatically close behind a person, overcoming the problem of human error. The safety gate can be “retro-fitted” to existing fixed structures where opening protection is required.
Kee Safety’s self-closing safety gates have been designed to be fully adjustable and can accommodate an opening up to 1m wide for the single gate and 2 x 0.9m for the double gate.
The single gate is available 1m wide and it can be easily cut to size on site.
The double gate is available 2 x 0.9m wide and it can be easily cut to size on site.
The full height gates for ladders are 1m wide and 1.1m high, and include an aluminium toe board
All safety gates are available in galvanised steel finish or yellow powder coated.
KEE GATE product range also includes pallet width gates which allow safe working for employees on a mezzanine or raised working surface.
Single Width Gates
The single self closing safety gate is supplied 1 metre wide and is fully adjustable; width can be cut to size on-site. Connecting the gate to the supporting structure is simple - two U-Bolts are used to attach the gate to a variety of uprights or flat surfaces from 33.7 to 48.3mm diameter. The Single Self Closing Safety Gate is compliant to EN 14122-3 : 2016 standard.
Double self closing safety gates are supplied for larger openings greater than 1m wide. The maximum width for double gates is 1.8m. The double gate is compliant to EN 14122-3 : 2016 requirements and does not require any locking mechanism to be used by the operator.
Double safety gates are both self-closing and will form a complaint barrier when a person has passed through the gate. This is achieved by strengthening the attachment and increasing the number of fixings when compare to the single gate option.
The double self-closing safety gate has undergone the same testing regime as the single gate and is available in both galvanised and powder coated options.
Full Height Gates
KEE GATE Full Height Self Closing Safety Gate has been designed to comply with BS 4211: Specification for Permanently Fixed Ladders, which requires gates on ladders to offer the same level of protection as EN 14122 compliant guardrail. Standing at 1100mm tall and featuring an aluminium toe board, it provides additional protection to those working at any level.The gate is fully adjustable and can accommodate openings up to 1m.
Ease of installation has played a major factor in the KEE GATE design. KEE GATE self closing gates can be easily installed on new and existing systems and do not require exact measurements before purchasing. The gates can be cut down to size on-site during install, to fit the required opening. See our simple installation guide below.
Testing & Certification
Kee Safety’s self-closing safety gates have been extensively tested, to make sure that our products are reliable and comply with international standards. The safety gates are CE accredited to the requirements of EN 1090 and comply with Work at Height Regulations, European Union Directives, EN14122-3 and test requirements of EN13374.
The safety gates passed salt spray testing to ASTM B117 - 11 - 55 Neutral solution over 200 hours to assess performance of coating to resist corrosion. The gates life cycle was tested to BS 6375-2:2009 Clause 6.5 – Opening and closing of Gate through 90 degrees 50,000 cycles giving. All test reports are available upon request.
RICS required a safe access solution at the top of restricted access staircases in their offices, to prevent people inadvertently falling down the stairs.
Kee Safety recommended our Kee Gate self-closing safety gates as a solution to the problem. The gates have been powder coated in white, to match the interior design of the office areas. The photos above demonstrate that Kee Gate safety gates are not exclusive to industrial environments, but also fit well in smarter surroundings too.
Self-closing safety gates offer a quick, cost-effective and easy to install safe access solution for internal and external locations, both at ground level and at height.
1. Stop. 2. Assess your surroundings. 3. Action (opening) required before continuing.
Where can Safety Gates be used?
Safety Gates can be used to provide a safe access to:Stairways, Control Panels, Gaps in Guardrails, Ladder Openings, Mobile Platforms and Kee Domes.
What sizes does the Kee Gate come in?
The European style gate comes in 1m length Standard. The North American style gates come in three sizes: 24", 30" and 36".
Are the Kee Gate products compliant with Global Safety Standards?
Absolutely, all products have been externally verified to the following standards: European: EN14122-3 :2016; North American: OSHA, O.B.C. and I.B.C.
Are these finishes robust?
Both the galvanised and powder coated finishes of the product have been Salt spray tested for 672 hours. Specification: SALT SPRAY TESTING - ASTM B117 - 11 - 55 Neutral solution.
Can the Kee Gate be adjusted on site?
Yes. The European style gate comes in 1m length and can be cut down on site to suit application. The North American style gate can be adjusted a 3” range per gate size.
What finishes do the Kee Gate products come in?
Galvanised Gates: components are supplied with a galvanised finish to BS EN ISO 1461; and ASTM A53: Hot Dip Galvanised Coatings Specification and Testing Methods, giving an average coating of between 55-100 microns. Powder Coated Gates: Europe - to EN 13438, North American to USA-AAMA 2603-2605.